• 论文专著

2018年-2020年,发表SCI/EI论文360篇、出版著作25部。

序号 论文/著作名称 期刊/出版单位名称 备注
1 精细控压钻井技术及其应用 石油工业出版社 专著
2 Research on CO2 Huff and puff in Multi-state Fractured Horizontal Wells of Tight Oil Reservoirs Ausasia science and technology press 专著
3 随钻声波传输技术 科学出版社 专著
4 2018年固井技术研讨会论文集 石油工业出版社 编著
5 A New Model of and Insight into Hydrate Film Lateral Growth along the Gas-Liquid Interface Considering Natural Convection Heat Transfer Energy & fuels SCI
6 Study on the migration of gas kicks in undulating sections of horizontal wells International journal of heat and mass transfer SCI
7 Experimental investigation of different factors influencing the replacement efficiency of CO2 for methane hydrate Applied energy SCI
8 Modeling of dynamic hydrate shell growth on bubble surface considering multiple factor interactions Chemical engineering journal SCI
9 Phase state control model of supercritical CO2 fracturing by temperature control International journal of heat and mass transfer SCI
10 Transient temperature calculation method for deep-water cementing based on hydration kinetics model Applied thermal engineering SCI
11 A hydrate shell growth model in bubble flow of water-dominated system considering intrinsic kinetics, mass and heat transfer mechanisms International journal of heat and mass transfer SCI
12 A mass transfer model for hydrate formation in bubbly flow considering bubble-bubble interactions and bubble-hydrate particle interactions International journal of heat and mass transfer SCI
13 Calculation of proppant-carrying flow in supercritical carbon dioxide fracturing fluid Journal of petroleum science and engineering SCI
14 Multiphase flow behavior for acid-gas mixture and drilling fluid flow in vertical wellbore Journal of petroleum science and engineering SCI
15 Whole wellbore liquid loading recognition model for gas wells Journal of natural gas science and engineering SCI
16 Thickening Supercritical CO2 with pi-Stacked Co-Polymers: Molecular Insights into the Role of Intermolecular Interaction Polymers SCI
17 Utilization of alkali-activated slag based composite in deepwater oil well cementing Construction and building materials SCI
18 Prediction of wax precipitation region in wellbore during deep water oil well testing Petroleum exploration and development SCI
19 Theoretical Study of Tool-Face Disorientation Mechanisms During Slide Drilling and Correction by Surface-Rotation Pulses SPE drilling & completion SCI
20 Novel mechanical foam breaker based on self-oscillation for promoting the application of foam drilling technology Chemical engineering science SCI
21 A novel vibration drilling tool used for reducing friction and improve the penetration rate of petroleum drilling Journal of petroleum science and engineering SCI
22 Wellbore collapse pressure analysis under supercritical carbon dioxide drilling condition Journal of petroleum science and engineering SCI
23 Research on the characteristics of earthworm-like vibration drilling Journal of petroleum science and engineering SCI
24 A new drilling method-Earthworm-like vibration drilling Plos one SCI
25 The effect of thermal stresses on the relation between rock failure and temperature and pressure of supercritical carbon dioxide jet Greenhouse gases-science and technology SCI
26 Characteristic study on supercritical carbon dioxide impinging jet: Calculation and stagnation properties analysis Journal of petroleum science and engineering SCI
27 Modelling the load transfer and tool surface for friction reduction drilling by vibrating drill-string Journal of petroleum science and engineering SCI
28 Effect of Amphiphilic Polymer/Nano-Silica Composite on Shale Stability for Water-Based Muds Applied sciences-basel SCI
29 A polymer microsphere emulsion as a high-performance shale stabilizer for water-based drilling fluids RSC advances SCI
30 Performance Evaluation of a Highly Inhibitive Water-Based Drilling Fluid for Ultralow Temperature Wells Journal of energy resources technology-transactions of the asme SCI
31 Molecular simulation aided design of copolymer thickeners for supercritical CO2 as non-aqueous fracturing fluid Journal of co2 utilization SCI
32 Flow assurance during deepwater gas well testing: Hydrate blockage prediction and prevention Journal of petroleum science and engineering SCI
33 Modeling of hydrate layer growth in horizontal gas-dominated pipelines with free water Journal of natural gas science and engineering SCI
34 Coupled temperature field model of gas-hydrate formation for thermal fluid fracturing Applied thermal engineering SCI
35 Quantitatively Assessing Hydrate-Blockage Development During Deepwater-Gas-Well Testing SPE journal SCI
36 A mechanism of fluid exchange associated to CO2 leakage along activated fault during geologic storage Energy SCI
37 An analytical model of wellbore strengthening considering complex distribution of cleat system Journal of natural gas science and engineering SCI
38 Shape transition of water-in-CO2 reverse micelles controlled by the surfactant midpiece Physical chemistry chemical physics SCI
39 Experimental study of the effect of liquid nitrogen pretreatment on shale fracability Journal of natural gas science and engineering SCI
40 Simulating the effect of hydrate dissociation on wellhead stability during oil and gas development in deepwater Journal of ocean university of china SCI
41 Sand production evaluation during gas production from natural gas hydrates Journal of natural gas science and engineering SCI
42 Experimental Investigation of Rock Drillability for Three Rock Types Under Varying Wellbore Pressure Conditions Rock mechanics and rock engineering SCI
43 Development of a mathematical model and experimental validation of borehole instability due to gravity displacement during drilling in a fractured formation Journal of petroleum science and engineering SCI
44 Visual tracking using improved flower pollination algorithm OPTIK SCI
45 Numerical Simulation of Hydraulic Fracturing in Weakly Consolidated Sandstone Chemistry and technology of fuels and oils SCI
46 Leak-off mechanism and pressure prediction for shallow sediments in deepwater drilling Journal of ocean university of China SCI
47 A novel self-healing spacer fluid for sustained casing pressure mitigation Journal of petroleum science and engineering SCI
48 Numerical investigation of fluid injection into poorly consolidated geomaterial considering shear dilation and compaction Journal of petroleum science and engineering SCI
49 Numerical simulation of hydraulic fracture propagation in weakly consolidated sandstone reservoirs Journal of central south university SCI
50 Rheological Properties and Damage-Control Mechanism of Oil-Based Drilling Fluid with Different Types of Weighting Agents The royal society SCI
51 Synergistic Effect of Latex Powder and Rubber on the Properties of Oil Well Cement-Based Composites Advances in materials science and engineering SCI
52 A coupled thermo-poroelastic analysis of wellbore stability for formations with anisotropic strengths Arabian journal of geosciences SCI
53 The rock fragmentation mechanism and plastic energy dissipation analysis of rock indentation Geomechanics and engineering SCI
54 The analysis of ductile-brittle failure mode transition in rock cutting Journal of petroleum science and engineering SCI
55 The rock breaking mechanism analysis of rotary percussive cutting by single PDC cutter Arabian journal of geosciences SCI
56 Investigation of PDC bit failure base on stick-slip vibration analysis of drilling string system plus drill bit Journal of sound and vibration SCI
57 The ROP mechanism study in hard formation drilling using local impact method Structural engineering and mechanics SCI
58 Optimization of cone bit bearing seal based on failure analysis Advances in mechanical engineering SCI
59 Depth control for storage tank in-service inspection robot based on artificial intelligence control Industrial robot SCI
60 A fractal model of effective stress of porous media and the analysis of influence factors Results in physics SCI
61 Three-dimensional simulation of the fracture system distribution in formation rock based on fractal method Archives of mining sciences SCI
62 Models for evaluating craters morphology,relation of indentation hardness and uniaxialcompressive strength via a flat-end indenter De gruyter SCI
63 Numerical Simulation of Temperature Field in Indirect Thermal Washing for Wax Cleaning Journal of thermal science and engineering applications SCI
64 An integrated workflow to design screen/slotted liners in geothermal wells Geothermics SCI
65 A semianalytical method for modeling two-phase flow in coalbed-methane reservoirs with complex fracture networks. Reservoir evaluation & engineering SCI
66 Comparison of Shale Inhibitors for Hydration, Dispersion, and Swelling Suppression Chemistry and technology of fuels and oils SCI
67 Comb-shaped copolymer as filtrate loss reducer for water-based drilling fluid Journal of applied polymer science SCI
68 Few Layered BiOBr with Expanded Interlayer Spacing and Oxygen Vacancies for Efficient Decomposition of Real Oil Field Produced Wastewater Acs sustainable chemistry & engineering SCI
69 Synthesis and Assessment of a CO2-Switchable Foaming Agent Used in Drilling Fluids for Underbalanced Drilling, Journal of surfactants and detergents SCI
70 Semimetal bismuth mediated UV–vis-IR driven photo-thermocatalysis of Bi4O5I2 for carbon dioxide to chemical energy Journal of co2 utilization SCI
71 Solid Phase Fabrication of Bismuth-rich Bi3O4ClxBr1-x Solid Solution for Enhanced Photocatalytic NO Removal under Visible Light Journal of the taiwan institute of chemical engineers SCI
72 Synthesis of One-dimensional Bi5O7Br0.5I0.5 Solid Solution for Effective Real Oilfield Wastewater Treatment via Exciton Photocatalytic Process Journal of the taiwan institute of chemical engineers SCI
73 Application of Multi-well Steam Injection and CO2 Technology in Heavy Oil Production, Liaohe Oilfield SPE improved oil recovery conference 2018 EI
74 Application of Rotating Magnet Ranging System and An Innovative Concept of Heat Recycling in SAGD Operation SPE trinidad and tobago section: 2018 energy resources conference EI
75 Research on Engineering Solutions for Presalt Formation Development and Depleted Salt Cavern Utilization in China and Middle Asia SPE annual caspian conference and exhibition EI
76 Application of Innovative High Temperature Deep Pyrolysis Technology to Treat Drilling Cuttings Harmlessly in Tarim Basim SPE/IADC middle east drilling technology conference and exhibition EI
77 Development and First Application of Monobore Openhole Expandable Clad in the Tarim Oilfield SPE EI
78 A Novel 8000m Rig and its Application for Ultra-Deep Well Drilling in Submountain Region SPE/IADC middle east drilling technology conference and exhibition EI
79 The Mechanical Properties and Micro-Structure of Oil Well Cement Enhanced by Graphene Oxide Materials science forum EI
80 Application of Innovative High Density High-Performance Water-Based Drilling Fluid Technology in the Efficient Development and Production of Ultra-Deep Complicated Formations in the Tian Mountain Front Block in China Offshore technology conference Asia EI
81 Study on the Effect of Innovative Leaching Solvent on the Oil Removal for Oily Drilling Cuttings Earth & environmental science EI
82 Research and Tset of Downhole Measurement Device for Seismic measurement while Drilling System Offshore technology conference Asia EI
83 Analysis of Dynamic Characteristics of TC Bearings for  Downhole Motors 25th international congress on sound and vibration EI
84 Analysis of Transmision Characteristcs of Continous Waves Used for Transmitting Information from Downhole to Surface in Drilling Engneering 25th international congress on sound and vibration EI
85 A Precise MPD Technology to Reduce Risk in Drilling of Fractured Cavernous Carbonate with Narrow Pressure Margins IADC/SPE Asia pacific drilling technology conference EI
86 PIPE ROCK钻柱扭摆系统应用评价 天然气工业 EI
87 固液两相流粒子冲蚀钻头内流道磨损 中南大学学报(自然科学版) EI
88 Development of a new pre-packed sand-retaining cell 52nd U.S. rock mechanics/geomechanics symposium EI
89 Numerical analysis of wellbore instability in weakly consolidated rock formations ISRM international symposium - 10th Asian rock mechanics symposium, arms 2018 EI
90 Numerical modeling of wellbore stability in naturally fractured shale formation 52nd U.S. rock mechanics/geomechanics symposium EI
91 Effects of fluid conditions on subcritical crack growth in tight sandstone 52nd U.S. rock mechanics/geomechanics symposium EI
92 Experimental study on conductivity of hydraulic fracture in coal bed Journal of mines, metals and fuels EI
93 Key technologies for salt-cavern underground gas storage construction and evaluation and their application Natural gas industry EI
94 A Fully Coupled Thermo-Hydro-Mechanical Model for Simulating Cyclic Steam Stimulation of Heavy Oil Reservoir 52nd U.S. rock mechanics/geomechanics symposium EI
95 Experimental and Numerical Investigations of Hydraulic Fracture Propagation in Weakly Consolidated Sandstone Reservoir 52nd U.S. rock mechanics/geomechanics symposium EI
96 Rock breaking and ROP rising mechanism of rotary-percussive drilling technology Acta petrolei sinica EI
97 Numerical Simulation and Experimental Study on Wear of Cone Bit Tooth. Journal of failure analysis & prevention EI
98 Failure analysis of roller cone bit bearing based on mechanics and microstructure Journal of failure analysis and prevention EI
99 Shale Gas-Hammer Mill Thermal System Safety Analysis Based on the HAZOP Method Iop conference series: earth and environmental science EI
100 脉冲射流式液动冲击工具的研制及现场应用 天然气工业 EI
101 扭转冲击钻井稳态钻进动力学特性及现场应用 中国石油大学学报( 自然科学版) EI
102 控压钻井技术与装备 石油工业出版社 专著
103 井下控制工程学导论 石油工业出版社 专著
104 天然气地下储气库数值模拟技术 石油工业出版社 专著
105 中国石油科技进展丛书《煤层气勘探开发技术》 石油工业出版社 专著
106 水力压裂力学 石油工业出版社 编译
107 连续管作业技术与装备 石油工业出版社 专著
108 深井超深井石油钻机及配套装备 石油工业出版社 专著
109 深部咸水层二氧化碳地质存储勘查评价与工程控制技术 地质出版社 专著
110 国外PDC钻头技术新进展 科学出版社 专著
111 工厂化钻完井与储层改造技术 石油工业出版社 专著
112 水力压裂设计模拟软件   专著
113 Experimental Investigation of Hydraulic Fracturing for Multi-type Unconventional Gas Co-exploitation in Ordos Basin Arabian journal for science and engineering SCI
114 Multiphase flow modeling of gas intrusion in oil-based drilling mud Journal of petroleum science and engineering SCI
115 Experimental investigation on the permeability of a hydrate-bearing reservoir considering overburden pressure Fuel SCI
116 Experimental investigation of the behavior of methane gas hydrates during depressurization-assisted CO2 replacement Journal of natural gas science and engineering SCI
117 Synthesis of pH-sensitive water and oil dual-absorption material using microemulsion polymerization process Fuel SCI
118 Coupled thermal model for geothermal exploitation via recycling of supercritical CO2 in a fracture–wells system Applied thermal engineering SCI
119 Calculation model of unsteady temperature–pressure fields in wellbores and fractures of supercritical CO2 fracturing Fuel SCI
120 Self-healing cement composite: Amine- and ammonium-based pH-sensitive superabsorbent polymers Cement and concrete composites SCI
121 An exact GITT solution for static bending of clamped parallelogram plate resting on an elastic foundation Engineering computations (swansea, wales) SCI
122 Simulation and Observation of Hydrate Phase Transition in Porous Medium via Microfluidic Application Nonlinear analysis: real world applications SCI
123 Methodology for pressure drop of bubbly flow based on energy dissipation Journal of petroleum science and engineering SCI
124 Methane Hydrate Dissociation Conditions in High-Concentration NaCl/KCl/CaCl2 Aqueous Solution: Experiment and Correlation Journal of chemical and engineering data SCI
125 Numerical simulation of the stability of hydrate layer during well cementing in deep-water region Journal of petroleum science and engineering SCI
126 Flow behavior of hydraulic fractured tight formations considering Pre-Darcy flow using EDFM Fuel SCI
127 A hybrid embedded discrete fracture model for simulating tight porous media with complex fracture systems Journal of petroleum science and engineering SCI
128 Experimental and modeling investigations into hydrate shell growth on suspended bubbles considering pore updating and surface collapse Chemical engineering science SCI
129 An experimental investigation of matrix components and grain size influence on the permeability in porous medium containing hydrate Heat and mass transfer/waerme- und stoffuebertragung SCI
130 Formation damage mechanisms associated with drilling and completion fluids for deepwater reservoirs Journal of petroleum science and engineering SCI
131 New Mass-Transfer Model for Predicting Hydrate Film Thickness at the Gas-Liquid Interface under Different Thermodynamics-Hydrodynamics-Saturation Conditions Journal of physical chemistry c SCI
132 Coupled heat and mass transfer model of gas migration during well cementing through a hydrate layer in deep-water regions Applied thermal engineering SCI
133 Experimental characterization of guest molecular occupancy in clathrate hydrate cages: A review Chinese journal of chemical engineering SCI
134 Modeling the flow of carbon dioxide during the drilling of oil, gas, and geothermal energy Energy SCI
135 Drag-Reduction and Resonance Problems of a Jointed Drillstring in the Presence of an Axial Excitation Tool Journal of energy resources technology, transactions of the asme SCI
136 Experimental study on toolface disorientation and correction during slide drilling Journal of petroleum science and engineering SCI
137 Numerical simulation and experimental investigation on tribological performance of micro-dimples textured surface under hydrodynamic lubrication International journal of mechanical sciences SCI
138 Study on the extension limit model of a horizontal well with supercritical carbon dioxide drilling Greenhouse gases: science and technology SCI
139 Modeling and mechanism analyzing of casing running with pick-up and release technique Journal of petroleum science and engineering SCI
140 Experimental study on harmless disposal of waste oil based mud using supercritical carbon dioxide extraction Fuel SCI
141 Research on the modulation mechanism and rock breaking efficiency of a cuttings waterjet Energy science and engineering SCI
142 Bitumen recovery from crude bitumen samples from halfaya oilfield by single and composite solvents-process, parameters, and mechanism Materials SCI
143 Synthesis and mechanism of amide rheological regulator Journal of china university of petroleum (edition of natural science) SCI
144 Study of 1-Octyl-3-methylimidazolium bromide for inhibiting shale hydration and dispersion Journal of petroleum science and engineering SCI
145 Experimental investigation of the effect of drilling fluid on wellbore stability in shallow unconsolidated formations in deep water Journal of petroleum science and engineering SCI
146 Application of the Darcy-Stefan model to investigate the thawing subsidence around the wellbore in the permafrost region Applied thermal engineering SCI
147 Numerical simulation of non-planar fracture propagation in multi-cluster fracturing with natural fractures based on Lattice methods Engineering fracture mechanics SCI
148 Research of fracture initiation and propagation in HDR fracturing under thermal stress from meso-damage perspective Energy SCI
149 Study of the enhanced geothermal system (EGS) heat mining from variably fractured hot dry rock under thermal stress Renewable energy SCI
150 Prediction of hydrate deposition in pipelines to improve gas transportation efficiency and safety Applied energy SCI
151 A model for predicting bubble velocity in yield stress fluid at low Reynolds number Chemical engineering science SCI
152 An integrated prediction model of hydrate blockage formation in deep-water gas wells International journal of heat and mass transfer SCI
153 Pattern transition of a gas–liquid flow with zero liquid superficial velocity in a vertical tube International journal of multiphase flow SCI
154 Experimental study on entrained droplets in vertical two-phase churn and annular flows International journal of heat and mass transfer SCI
155 Experimental study on the effect of surfactants on the characteristics of gas carrying liquid in vertical churn and annular flows Journal of petroleum science and engineering SCI
156 Experimental study on bubble and droplet entrainment in vertical churn and annular flows and their relationship Chemical engineering science SCI
157 An adaptive pattern recognition method for early diagnosis of drillstring washout based on dynamic hydraulic model Journal of natural gas science and engineering SCI
158 Geothermal energy production utilizing a U-shaped well in combination with supercritical CO2 circulation Applied thermal engineering SCI
159 Geothermal exploitation by circulating supercritical CO2 in a closed horizontal wellbore Fuel SCI
160 Multiple controlling factors for methane hydrate formation in water-continuous system International journal of heat and mass transfer SCI
161 Experimental Study of Methane Hydrate Formation in Water-Continuous Flow Loop Energy and fuels SCI
162 Adaptive modeling of rock crack mechanism during drilling operation based on modified peridynamics Engineering fracture mechanics SCI
163 Molecular dynamics study of the intercalation and conformational transition of poly (N-vinyl caprolactam), a thermosensitive polymer in hydrated Na-montmorillonite Polymer SCI
164 Fluid-structure interaction simulation of rotary percussion drilling tool Shiyou xuebao/acta petrolei sinica SCI
165 Initiation Pressure and Corresponding Initiation Mode of Drilling Induced Fracture in Pressure Depleted Reservoir Journal of energy resources technology, transactions of the asme SCI
166 Numerical modeling of hydraulic fracture propagation behaviors influenced by pre-existing injection and production wells Journal of petroleum science and engineering SCI
167 Exploration of non-planar hydraulic fracture propagation behaviors influenced by pre-existing fractured and unfractured wells Engineering fracture mechanics SCI
168 Seafloor subsidence response and submarine slope stability evaluation in response to hydrate dissociation Chemical engineering journal SCI
169 Wellbore shrinkage during drilling in methane hydrate reservoirs Energy science and engineering SCI
170 Drilling parameter optimizing strategies to prevent hydrate decomposition risks Applied thermal engineering SCI
171 Decomposition prevention through thermal sensitivity of hydrate formations around wellbore Applied thermal engineering SCI
172 Effect of liquid nitrogen cooling on the permeability and mechanical characteristics of anisotropic shale Journal of petroleum exploration and production technology SCI
173 Effects of non-uniform pore pressure field on hydraulic fracture propagation behaviors Engineering fracture mechanics SCI
174 Experimental study of sand control in a natural gas hydrate reservoir in the South China sea International journal of hydrogen energy SCI
175 An experimental study on the hydraulic fracturing of radial horizontal wells Geomechanics and engineering SCI
176 Investigation on heat extraction characteristics in randomly fractured geothermal reservoirs considering thermo-poroelastic effects Energy science and engineering SCI
177 Numerical investigation on the freezing evolution process of rock mass at sub-zero temperature Journal of applied science and engineering SCI
178 Influences of hydrate decomposition on submarine landslide Landslides SCI
179 Influence of relation between stress field and bedding space on wellbore stability in shale formation Arabian journal of geosciences SCI
180 An experimental study on stress sensitivity of tight sandstone gas reservoirs during nitrogen drilling Arabian journal of geosciences SCI
181 Dynamic analysis of wellbore stress field and wellbore stability in carbonate reservoir production process Arabian journal of geosciences SCI
182 Experimental study and evaluation for borehole stability of fractured limestone formation Journal of petroleum science and engineering SCI
183 An analytical model for describing sequential initiation and simultaneous propagation of multiple fractures in hydraulic fracturing shale oil/gas formations Energy science & engineering SCI
184 Concepts and characteristics of a U-shaped docking well geothermal heat extraction system Energy exploration & exploitation SCI
185 Transient Pressure Fluctuation Effect During Gas Drilling in Horizontal Well Chemistry and technology of fuels and oils SCI
186 RGB-D-Based Object Recognition Using Multimodal Convolutional Neural Networks: A Survey IEEE access SCI
187 Mechanism of casing failure during hydraulic fracturing: Lessons learned from a tight-oil reservoir in China Engineering failure analysis SCI
188 An analytical model for fracture initiation in elasto-plastic soft formations based on stress path analysis Journal of petroleum science and engineering SCI
189 A 2D explicit numerical scheme-based pore pressure cohesive zone model for simulating hydraulic fracture propagation in naturally fractured formation Energy science & engineering SCI
190 Comprehensive experimental study on the sand retention media of pre-filled sand control screens Particulate science and technology SCI
191 Performance of Environmentally Friendly Silica Nanoparticles-Enhanced Drilling Mud from Sugarcane Bagasse Particulate science and technology SCI
192 hermoplastic Rubber (TPR) Modified by a Silane Coupling Agent and Its Influence on the Mechanical Properties of Oil Well Cement Pastes Advances in materials science and engineering SCI
193 The Role of Load Control Modes in Determination of Mechanical Properties of Granite Rock mech rock eng SCI
194 Feasibility Study of Applying Modified Nano-Si02 Hyperbranched Polymers SCI
195 Experimental study of the force response and chip formation in rock cutting(Article) Arabian journal of geosciences SCI
196 A New Approach of Rock Cutting Efficiency Evaluation by using Plastic Energy Dissipation Ratio Ksce journal of civil engineering SCI
197 Numerical modelling of bottom-hole rock in underbalanced drilling using thermo-poroelastoplasticity model Structural engineering and mechanics SCI
198 A feasible study for the working mechanism and parameter optimization of the agitator Advances in mechanical engineering SCI
199 Investigation of the tool-rock interaction using Drucker-Prager failure criterion Journal of petroleum science and engineering SCI
200 Response of a Two-Degree-of-Freedom Vibration System with Rough Contact Interfaces Shock & vibration SCI
201 Research on working principle and cross-track cutting characteristic of the axis-tilted rock-breaking tool Advances in mechanical engineering SCI
202 Development of a cutting force model for a single pdc cutter based on the rock stress state Rock mechanics and rock engineering SCI
203 Fracture Mechanism of the Formation with a Natural Flaw Under a Single-Tooth Cutting Acta mechanica solida sinica SCI
204 Research on Energy Response Characteristics of Rock under Harmonic VibroImpacting Drilling Journal of vibration engineering & technologies SCI
205 Research on the Resonance Characteristics of Rock under Harmonic Excitation Shock and vibration SCI
206 Coal breakage using abrasive liquid nitrogen jet and its implications for coalbed methane recovery Applied energy SCI
207 Modeling fishbones in coalbed methane reservoirs using a hybrid model formulation: gas/water production performance in various lateral-cleat-network geometries Fuel SCI
208 Performance analysis of a downhole coaxial heat exchanger geothermal system with various working fluids Applied thermalengineering SCI
209 Thermoresponsive Bentonite for Water-Based Drilling Fluids Materials SCI
210 Structure and inhibition properties of a new amine-terminated hyperbranched oligomer shale inhibitor Journal of applied polymer science SCI
211 Preparation of a novel Zscheme AgI/Ag/Bi24O31Cl10 catalyst with enhanced photocatalytic performance via an Ag0 electron transfer intermediate Journal of materials science: materials in electronics SCI
212 Change in photocatalytic NO removal mechanisms of ultrathin BiOBr/BiOI via NO3–adsorption Applied catalysis b: environmental SCI
213 Preparation of stable and superior flux GO/LDH/PDA-based nanofiltration membranes through electrostatic self-assembly for dye purification Polym adv technol SCI
214 Ultrathin Bi4O5Br2 nanosheets for selective photocatalytic CO2 conversion into  CO Chemical engineering journal SCI
215 Ultrathin structural BiOI with surface oxygen vacancies for  improved photocatalytic degradation of organic pollutants Journal of materials science-materials in electronics SCI
216 BiOBrxI1−x/BiOBr heterostructure engineering for efficient molecular oxygen activation Chemical engineering journal SCI
217 Quantitative Investigation of the Hydration Behavior of Sodium Montmorillonite by Thermogravimetric Analysis and Low-Field Nuclear Magnetic Resonance Energy & fuels SCI
218 Investigating the Role of Alkyl Chain Length of the Inhibitors on Its Intercalation Inhibiting Mechanism in Sodium Montmorillonite Energy & fuels SCI
219 Prediction of Fracture Width Using Logging Data Optimization of Lost Circulation Chemistry and technology of fuels and oils SCI
220 Experimental study on the characterization of hydraulic fracture tip using digital image correlation method 5th isrm young scholars' symposium on rock mechanics and international symposium on rock engineering for innovative future EI
221 提高四川盆地页岩气开发效益的工程方案 天然气工业 EI
222 The foamability analysis of foam drainage in liquid-producing gas wells Shiyou xuebao/acta petrolei sinica EI
223 A new prediction model for hydrate deposition in deepwater gas well Shiyou xuebao/acta petrolei sinica EI
224 Experiment on mechanical properties of shale soaked with supercritical carbon dioxide Journal of china university of petroleum (edition of natural science) EI
225 Assessment of gas kick risk for high temperature and high pressure horizontal wells considering reservoir and wellbore characteristics Journal of china university of petroleum (edition of natural science) EI
226 An experimental study on plugging and erosion failures of sand screen in grave-packing conditions Journal of china university of petroleum (edition of natural science) EI
227 Effects of inhibitor KCl on shale expansibility and mechanical properties(Open Access) Petroleum EI
228 氮气钻井井底岩爆机理及动态过程演化 天然气工业 EI
229 Numerical modeling of wellbore stability and sand production of heavy oil reservoir with cyclic steam stimulation 53rd U.S. rockmechanics/geomechanicssymposium EI
230 Numerical modeling of indirect hydraulic fracturing in coalbed methane reservoir 53rd U.S. rockmechanics/geomechanicssymposium EI
231 Numerical simulation of time-dependent wellbore instability in naturally fractured shale formation 53rd U.S. rockmechanics/geomechanicssymposium EI
232 Deformation characteristics of unconsolidated sandstone and soft mudstone and their effects on drilling engineering 53rd U.S. rockmechanics/geomechanicssymposium EI
233 Investigation of interface cementation failure mechanism under downhole mechnical-chemical condition 53rd U.S. rockmechanics/geomechanicssymposium EI
234 Wellbore stability analysis using an elasto-plastic Mogi-Coulomb model 53rd U.S. rockmechanics/geomechanicssymposium EI
235 A method of making deepwater shallow sediments considering their rehological properties Marine georesources and geotechnology EI
236 Prediction of Casing Damage in Unconsolidated Sandstone Reservoirs Using Machine Learning Algorithms IEEE EI
237 Study on the Influence of Lubrication Cooling State on Sliding
Shoe and Guiding Plate of Fracturing Pump
Journal of failure analysis & prevention EI
238 《2018年度优秀标准释义汇编》 石油工业出版社 编著
239 《钻井工程重要技术标准释义汇编(三)》 石油工业出版社 编著
240 钻井液页岩抑制剂作用机理及应用技术 石油工业出版社 专著
241 库车山前深井钻完井液技术 石油工业出版社 专著
242 盐穴储库造腔工程技术 石油工业出版社 专著
243 尼日尔沙漠油田钻完井技术 石油工业出版社 专著
244 水基钻井液、完井液及修井液技术与处理剂 石油工业出版社 编译
245 可酸溶钻井液储层保护技术研究及在高石126井的应用 石油工业出版社 编著
246 神木区块致密砂岩气藏储层保护钻井液优选 石油工业出版社 编著
247 The Study on the Influence of Acidification on the Pore and Seepage Field of Carbonate Reservoir Mech. Mach. Sci 专著
248 Experimental investigation into hydraulic fracture geometry and proppant migration characteristics for southeastern Sichuan deep shale reservoirs Journal of petroleum science and engineering SCI
249 Influence of halloysite nanotube on hydration products and mechanical properties of oil well cement with nano-silica Construction and building materials SCI
250 Mechanical Properties and Enhancement Mechanism of Oil-Well Hindawi SCI
251 Influence of Various Hydrocarbon Groups on the Effectiveness and Environmental Characteristics of Anti-Collapse Agent for Drilling Fluids Chemistry and technology of fuels and oils SCI
252 Environmental Protection Performance of Anti-Collapse Agents with Different Hydrophobic Chain Lengths Chemistry and technology of fuels and oils SCI
253 Multi-scale Elastoplastic mechanical model and microstructure damage analysis of solid expandable tubular Chinese physics b SCI
254 Experimental study of multi-timescale crack blunting in hydraulic fracture Petroleum science SCI
255 The optimum interwell distance analysis of two-well-horizontal salt cavern construction Energy sources, part a: recovery, utilization, and environmental effects SCI
256 Influence of tubing/oil-blanket lifting on construction and geometries of  two-well-horizontal salt caverns Tunnelling and underground space technology SCI
257 Performance and application of high-strength water-swellable material for reducing lost circulation under high temperature Journal of petroleum science and engineering SCI
258 Rheology and fluid loss of a polyacrylamide-based micro-gel particles in a water-based drilling fluid Materials express SCI
259 Insight into beta-cyclodextrin polymer microsphere as a potential filtration reducer in water-based drilling fluids for high temperature application Carbohydrate polymers SCI
260 Microfluidics application for monitoring hydrate phase transition in flow throats and evaluation of its saturation measurement Chemical engineering journal SCI
261 A dynamic model for predicting the geometry of bubble entrapped in yield stress fluid Chemical engineering journal SCI
262 Numerical modeling of hydration performance for well cement exposed to a wide range of temperature and pressure Construction and building materials SCI
263 Wellhead backpressure control strategies and outflow response characteristics for gas kick during managed pressure drilling Journal of natural gas science and engineering SCI
264 Mechanism of gas migration through microstructure of cemented annulus in deep-water environment Journal of natural gas science and engineering SCI
265 Experiment and simulation on the integrity of cement ring interface in deep water shallow formation Journal of petroleum science and engineering SCI
266 A constitutive model for predicting the solubility of gases in water at high temperature and pressure Journal of petroleum science and engineering SCI
267 A coupled model of temperature and pressure based on hydration kinetics during well cementing in deep water Petroleum exploration and development SCI
268 Characterizing the Rheology of Methane Hydrate Slurry in a Horizontal Water-Continuous System SPE journal SCI
269 Parameter Prediction Method for Submarine Cuttings Piles in Offshore Drilling SPE journal SCI
270 Study on horizontal wellbore flow of supercritical carbon dioxide drilling Applied thermal engineering SCI
271 An investigation on the drag reduction performance of bioinspired pipeline surfaces with transverse microgrooves Beilstein journal of nanotechnology SCI
272 Modeling and Experimental Study on Motion States of Laboratory-Scale Bottom Hole Assembly in Horizontal Wells Energies SCI
273 Study on Proppant Transport in Fractures of Supercritical Carbon Dioxide Fracturing Energy & fuels SCI
274 Numerical simulation of temperature field in crack of supercritical carbon dioxide fracturing Energy science & engineering SCI
275 Investigation on the tribological performance of micro-dimples textured surface combined with longitudinal or transverse vibration under hydrodynamic lubrication International journal of mechanical sciences SCI
276 Analysis of the main factors affecting bottom hole assembly Re-entry into main hole in forward drilling of fishbone wells Journal of petroleum science and engineering SCI
277 Study on particle settling in supercritical carbon dioxide drilling and fracturing Journal of petroleum science and engineering SCI
278 A novel wellbore strengthening method by using rotary jet while drilling Journal of petroleum science and engineering SCI
279 A fracture initiation model for carbon dioxide fracturing considering the bottom hole pressure and temperature condition Journal of petroleum science and engineering SCI
280 Experimental measurement on the viscosity of supercritical carbon dioxide Measurement SCI
281 Analytical investigation of the friction reduction performance of longitudinal vibration based on the modified elastoplastic contact model Tribology international SCI
282 Synthesis of carboxymethyl chitosan as an eco-friendly amphoteric shale inhibitor in water-based drilling fluid and an assessment of its inhibition mechanism Applied clay science SCI
283 Surface coating on solidified water-based drilling waste materials and its mechanism for resource reuse Journal of chemical technology and biotechnology SCI
284 Synthesis, characterization, and performance of carboxymethyl chitosan with different molecular weight as additive in water-based drilling fluid Journal of molecular liquids SCI
285 The thermal and chemical effect on wellbore strengthening treatment in shale formation Journal of natural gas science and engineering SCI
286 Effect of different parameters on sealing performance of lost circulation process with dynamic fracture aperture testing apparatus Journal of petroleum science and engineering SCI
287 Coupled CFD-DEM analysis of parameters on bridging in the fracture during lost circulation Journal of petroleum science and engineering SCI
288 Parametric study on near-wellbore fracture geometry for wellbore strengthening in anisotropic formation Journal of petroleum science and engineering SCI
289 Nitrogen-containing switchable solvents for separation of hydrocarbons and their derivatives RSC advances SCI
290 Method and Mechanism of Regulating Rheological Properties of Water-Based Drilling Fluid by High-Frequency and High-Voltage Alternating Current Electric Field SPE journal SCI
291 Analysis of Chemo-Poro-Thermo-Mechanical Effects on Wellbore Strengthening Journal of energy resources technology-transactions of the asme SCI
292 Effects of the Solidification of Capillary Bridges on the Interaction Forces between Hydrate Particles Energy & fuels SCI
293 Numerical investigation on abnormally elevated pressure in laboratory-scale porous media caused by depressurized hydrate dissociation Fuel SCI
294 Molecular insight into the oil extraction and transport in CO2 flooding with reservoir depressurization International journal of heat and mass transfer SCI
295 Experimental study of hydraulic fracture initiation and propagation in highly saturated methane-hydrate-bearing sands Journal of natural gas science and engineering SCI
296 A new analytical model of wellbore strengthening for fracture network loss of drilling fluid considering fracture roughness Journal of natural gas science and engineering SCI
297 An improved model for the migration of fluids caused by hydrate dissociation in porous media Journal of petroleum science and engineering SCI
298 New insight into CO2 huff-n-puff process for extraheavy oil recovery via viscosity reducer agents: An experimental study Journal of co2 utilization SCI
299 Prediction model and energy dissipation analysis of Taylor bubble rise velocity in yield stress fluid Chemical engineering journal SCI
300 Research on the effects of liquid viscosity on droplet size in vertical gas?liquid annular flows Chemical engineering science SCI
301 Methane hydrate formation in a water-continuous vertical flow loop with xanthan gum Fuel SCI
302 Hydrate deposition prediction model for deep-water gas wells under shut-in conditions Fuel SCI
303 Investigation of rheological properties of methane hydrate slurry with carboxmethylcellulose Journal of petroleum science and engineering SCI
304 A gas kick early detection method outside riser based on Doppler ultrasonic wave during deepwater drilling Petroleum exploration and development SCI
305 Experimental Investigation of Methane Hydrate Formation in the Carboxmethylcellulose (CMC) Aqueous Solution SPE journal SCI
306 Real-Time Estimation and Management of Hydrate Plugging Risk During Deepwater Gas Well Testing SPE journal SCI
307 Rheological Properties of Methane Hydrate Slurry in the Presence of Xanthan Gum SPE journal SCI
308 A Powerful Build-Up Rate (BUR) Prediction Method for the Static Push-the-Bit Rotary Steerable System (RSS) Energies SCI
309 Strength estimation for hydrate-bearing sediments based on triaxial shearing tests Journal of petroleum science and engineering SCI
310 Study on the Erosion of Screen Pipe Caused by Sand-Laden Slurry Journal of engineering research SCI
311 Geomechanical issues in the exploitation of natural gas hydrate Gondwana research SCI
312 Experimental study on dynamic acoustic characteristics of natural gas hydrate sediments at different depths International journal of hydrogen energy SCI
313 Two-Dimensional Pore Pressure Distribution Model to Evaluate Effects of Shale Semipermeable Membrane Characteristics Journal of energy resources technology-transactions of the asme SCI
314 Analysis of instability mechanisms of natural fractures during the approach of a hydraulic fracture Journal of petroleum science and engineering SCI
315 Influence of drilling fluid temperature on borehole shrinkage during drilling operation in cold regions Journal of petroleum science and engineering SCI
316 Experimental study on brittle response of shale to cryogenic fluid nitrogen treatment Journal of petroleum science and engineering SCI
317 Numerical study on heat extraction performance of multistage fracturing Enhanced Geothermal System Renewable energy SCI
318 Multilevel method based on improved radar chart to evaluate acoustic frequency spectrum in periodic pipe structure Journal of petroleum science and engineering SCI
319 Dynamic response and strength failure analysis of bottomhole under balanced drilling condition Journal of petroleum science and engineering SCI
320 Effects of inhibitor KCl on hydration swelling and softening of a smectite-poor mudstone Journal of petroleum exploration and production technology SCI
321 Wellbore Stability in Layered Rocks: A Comparative Study of Strength Criteria Journal of energy resources technology-transactions of the asme SCI
322 Effects of Cyclic Heating and Water Cooling on the Physical Characteristics of Granite Energies SCI
323 Study on mechanical properties and wellbore stability of deep brittle shale Journal of petroleum science and engineering SCI
324 Multi-coupling stress field and evaluation of borehole stability in deep brittle shale Arabian journal of geosciences SCI
325 Effect of surface wetting behavior of ceramic proppant on the two-phase flow across the interface of sandstone and fracture Energy science & engineering SCI
326 Liquid-liquid gravity displacement in a vertical fracture during drilling: Experimental study and mathematical model Energy exploration & exploitation SCI
327 Casing deformation mechanisms of horizontal wells in Weirong shale gas field during multistage hydraulic fracturing J. Nat. Gas Sci. Eng. SCI
328 Experimental and numerical investigation of GasLiquid gravity displacement in a horizontal well intersecting a vertical fracture J. Nat. Gas Sci. Eng. SCI
329 Lithological Interface Detection Using an Impact Source Shock and vibration SCI
330 Effects of bedding structures on the propagation characteristics of acoustic waves in shales at operating frequencies of acoustic logging Aip advances SCI
331 A new laboratory protocol to study the plugging and sand control performance of sand control screens Journal of petroleum science and engineering SCI
332 Comparative study on sanding characteristics between weakly consolidated sandstones and unconsolidated sandstones Journal of natural gas science and engineering SCI
333 Initiation of hydraulically or drilling-induced tensile wall-fractures from arbitrarily inclined boreholes: Implications for constraints in the magnitudes of in-situ stresses Journal of petroleum science and engineering SCI
334 Spatial Modulation and MP-WFRFT Aided Multi-Beam Wireless Communication Scheme Based on Random Frequency Diverse Array Sensors SCI
335 Study on Reflected Sound Field Characteristics of Impulse Source in Open-hole Well during Deep Detection Polish maritime research:pmr-l252. SCI
336 Simulation study on the influence of parabolic reflector on the sound field of deep detection near the open hole. Applied ecology and environmental research :si-l169 SCI
337 Study on influencing factors of deep detection acoustic reflection of borehole-side while drilling based on Impulse Source Polish maritime research:pmr-l255 SCI
338 Study on the energy accumulation characteristics of impulse sound source and the detection of borehole-side fracture for open hole deep detection Applied ecology and environmental research:si-l162 SCI
339 Secure Multiusers Directional Modulation Scheme Based on Random Frequency Diverse Arrays in Broadcasting Systems Security and communication networks SCI
340 Artificial-Noise-Aided Energy-Efficient Secure Multibeam Wireless Communication Schemes Based on Frequency Diverse Array Wireless communications & mobile computing SCI
341 CO2 Capture With Absorbents of Tertiary Amine Functionalized Nano-SiO2 Namomaterials SCI
342 A cutter path generation strategy for helical surface machining of screw rotor Science progress SCI
343 Numerical modelling and field experimental validation of the axial load transfer on the drill-strings in deviated wells Journal of natural gas science & engineering SCI
344 On the interference mechanism of stray current generated by DC
tram on pipeline corrosion
Engineering failure analysis SCI
345 Nonlinear dynamics of lump mass model of drill-string in horizontal well. International journal of mechanical sciences SCI
346 Nonlinear 3D finite element analysis of a shear-wave vibrator-ground interaction system Soil dynamics and earthquake engineering SCI
347 Hydraulic Structure Design and Downhole Flow Field Optimization of Geophysical Drill Bits in a Limestone Stratum Science progress SCI
348 Application of an Innovative Ridge-Ladder-Shaped Polycrystalline Diamond Compact Cutter to Reduce Vibration and Improve Drilling Speed Science progress SCI
349 Research on spatial positioning of online inspection robots for vertical storage tanks. Industrial robot SCI
350 Analysis on the heat extraction performance of multi-well injection enhanced geothermal system based on leaf-like bifurcated fracture networks Energy SCI
351 Study on the effect of well layout schemes and fracture parameters on the heat extraction performance of enhanced geothermal system in fractured reservoir Energy SCI
352 Numerical simulation study on the heat extraction performance of multi-well injection enhanced geothermal system Renewable energy SCI
353 Numerical simulation on heat extraction performance of enhanced geothermal system under the different well layout Energy exploration & exploitation SCI
354 Application of Resonance Enhanced Drilling to coring Journal of petroleum science and engineering SCI
355 Numerical Study on the Elastic Deformation and the Stress Field of Brittle Rocks under Harmonic Dynamic Load Energies SCI
356 An innovative experimental apparatus for the analysis of natural gas hydrate erosion process using cavitating jet Review of scientific instruments SCI
357 Rock breaking characteristics of the self-rotating multi-orifices nozzle applied to coalbed methane radial jet drilling International journal of rock mechanics and mining sciences SCI
358 Non-contaminating cryogenic fluid access to high-temperature resources: Liquid nitrogen fracturing in a lab-scale Enhanced Geothermal System Renewable energy SCI
359 Liquid nitrogen fracturing in boreholes under true triaxial stresses: laboratory investigation on fractures initiation and morphology SPE journal SCI
360 Laboratory investigation on cryogenic fracturing of hot dry rock under triaxial-confining stresses Geothermics SCI
361 Intercalation Inhibits the Surface Hydration of Sodium Montmorillonite: Experiments and Density Functional Theory Simulation Acs sustainable chemistry & engineering SCI
362 Investigation on the inhibition mechanism of alkyl diammonium as montmorillonite swelling inhibitor: Experimental and molecular dynamics simulations Fuel SCI
363 Low Molecular Weight Branched Polyamine as a Clay Swelling Inhibitor and Its Inhibition Mechanism: Experiment and Density Functional Theory Simulation Energy & fuels SCI
364 Implementing a New Managed Pressure Drilling Equipment to Drill Offshore Wells Offshore technology conference EI
365 Implementing Managed Pressure Drilling Technique in Drilling an Offshore Exploration Well Offshore technology conference Asia EI
366 Study on acid fracturing technology for carbonate reservoirs Omae2020 EI
367 Three-dimensional Geomechanical Model Establishment and Application Based on Complicated Structures in Yingxi Area of Qinghai Oilfield 第54届美国岩石力学大会(arma) EI
368 Case Study:Treating Parameters Optimization in Casing Deformation Wells of Shale Gas in Sichuan Basin 第54届美国岩石力学大会(arma) EI
369 The Strength and Microstructure Properties of Oil Well Cement with Halloysite Nanotube Iop conf. Series: earth and environmental science EI
370 Synthesis and fluorescence properties of dansyl labeled triazine dendrons Materials science and engineering EI
371 Novel Spherical Polymer Sealing Agent for Oil-Based Drilling Fluids to Overcome Borehole Instability Problem in Low Permeability Reservoirs Key engineering materials EI
372 Novel Responsive Controllable Solidification Plugging Agent to Overcome Lost Circulation Problems in Long Open Hole Intervals Journal of physics: conference series EI
373 Understanding and Research on the Drilling Fluid Technology for Shale GasHorizontal Wells in South Sichuan, China IPTC会议 EI
374 Kinetic mechanism of hydrophilic amino acid inhibiting the formation of tetrahydrofuran (THF) hydrate Natural gas industry b EI
375 A New Slimhole Neutron Porosity Logging While Drilling Tool Using a Pulsed Neutron Generator Source SPE-203199-MS EI
376 Development of Responsive Well Plugging Material in Carbonate Reservoir The 9th global conference on materials science and engineering EI
377 Research on Radial Drilling Technology of High Efficient Rock Breaking Under High Temperature Deep Well Conditions SPE EI
378 凸脊型非平面齿PDC钻头的研制与现场试验 石油钻探技术 EI
379 钛合金钻杆在页岩气长水平段的延伸钻进能力分析 天然气工业 EI
380 四川盆地深层碳酸盐岩钻完井技术实践与展望 天然气工业 EI
381 Application of Parameter Coupling in Developing Intelligent Decision System 2020 IEEE 5th international conference on cloud computing and big data analytics, icccbda 2020 EI
382 Drillability characteristics of formation and evaluation of bit selection for the Zhongtaishan structural strata in Sichuan Basin, China(Open Access) Iop conference series: earth and environmental science EI
383 Evaluation methods and standards for rock drillability in oil and gas drilling engineering in China: A review(Open Access) Iop conference series: earth and environmental science EI
384 寒带海域永冻层的力学特性对油气钻井的挑战 天然气工业 EI
385 Numerical simulation analysis of hybrid impact cutting and its comparison with torsional impact cutting Journal of vibroengineering EI